Coating machine / automatic coating machine
Type A 250
incl. roller conveyors in front and behind the machine
completely cleaned and checked!
suitable for the application of paints, wood preservatives, oils and waxes
(e.g. for exterior cladding, also clinker cladding)
suitable for impregnating solid wood
9 spray nozzles (3 mm) for all-round wood preservative application
12 rotating distributor brushes on 8 axes (standard nylon trim):
one driven feed roller (feed adjustable, approx. 25-40 m/min.)
electronic membrane pump
capacity approx. 960 - 2500 meters/hour
max. height 100 mm x width 250 mm x length min. approx. 800 mm
Power supply 3 × 380 V EU
Machine weight approx. 300 kg
Due to the simple construction of the machine, it is easy to operate.
As it is equipped with rubber wheels as standard, it can be moved without any problems and can therefore also be used on construction sites, for example.
Any spray mist (overspray) remains in the housing and, thanks to the integrated drain, runs automatically back into the spray agent tank and can be reused.
Operation and procedure:
The wood workpiece is fed horizontally through the machine by means of a feed.
The wood workpiece is sprayed all around by 9 differently arranged spray nozzles. Even workpieces with irregular absorbency and rough surfaces are sprayed with sufficient wood preservative.
12 distributor brushes ensure an even application without color runs or color overlaps on the workpiece surface, so that you obtain an optimum finish. Excess wood preservative is brushed off during this process, remains in the closed circuit of the machine and is fed back into the application agent container for further use.
The machine comes complete with brushes and filter bags and is ready for use immediately after it is connected to the power supply.
Coating Machine / Autom. Coater - second-hand