GreCon Finger Jointing Line - second hand not available

Описание

Finger Jointing Line
make GreCon
type Turbo

feeding length min. approx. 150 mm
feeding length max. approx. 1000 mm
feeding length with 75 x 225 mm approx.: 180 - 1500 mm
work piece width min. approx. 40 mm
work piece width max. approx. 225 mm
work piece thickness min. approx. 19 mm
work piece thickness max. approx. 75 mm
average wood cross section 50 x 150 mm
max. wood cross section at 10 mm dovetails size
hard wood approx. 100 cm²
soft wood approx. 140 cm²
max. pressing force 14 t
finger joint profile 10/11 and 15/16 mm (75 x 225)
wood outfeed length with fence 3000 - 6100 mm

supply voltage 380 V
control voltage 24 V 50 cycles

extraction (diameter 2 x 250 / 2 x 100 mm)
extraction speed at negative pressure of 12 mbar: 30 m/sec.
air connection at consumer: R ½"
air pressure at consumer: 7 bar
working height 900 mm

foundation load 2 kp/cm²


EXAMPLE
working time 480 min./shift
average wood input length at finger jointing line 1200 mm
average wood cross section 50 x 100 mm
capacity of milling machine: 5 tables/min.
lamellae each milling table: 11 pieces
press capacity: 6 cycles à 6 m
time factor 0,7

MILLING MACHINE
5 tables / min. x 11 lamellae / milling table x 1,2 m average input length x 480 min./shift x time factor 0,7 =
= 22176 m/shift

PRESS
6 cycles / min. x 6 m press length x 480 min. / shift x time factor 0,7 = 12096 m/shift

Other input data = other capacity data.

Location of the line is Ukraine.