Promas Edge Bander - NEW not available

номер машини 5876

Виробник

Promas

Модель

PB 90

Статті

Станки для кантування

стан

заново

This machine is not available anymore.

We hope one of the following machines fits your needs:

Promas Edge Bander - NEW PB 90 main picture not available

Опис

Edge Bander
make Promas
type PB 90

suitable for following banding materials:
melamine / PVC / ABS / PP / veneer 0,4/3,0 mm thick
wood strips up to 5 mm (manual single feed)

workpiece thickness 8 - 60 mm
workpiece length min. ca. 120 mm
workpiece width min. ca. 75 mm
feed speed 8.0 m/min.

total connection 4.82 kW
dimensions installed 3173 x 1571 x 1370 mm
weight net 684 kg

Equipment:

Rotatable roller table D = 800 mm for roller material

Pressure zone:
includes a driven pressure roller in synchron movement with the glue roller and
two smaller pressure rollers with spring tension,
for good jointing of the edge material on the workpiece
adjustment of the pressure zone with mechanical SIKO display

High frequency trimming saw:
equipped with an HF motor 0.27 kW, 12,000 rpm and 2 saw blades
high-precision linear guides ensure a clean and precise saw cut
tool: saw-blade 100x32x3 Z30

High frequency combi-milling station:
2 high-performance, high-frequency motors 0.55 kW, 12,000 rpm with HM-WPL special millers
suitable for radius, chamfer, flush milling, with horizontal and vertical scanning of the workpiece,
unit adjustment equipped with digital counters for setting to different edge thicknesses;
horizontal and vertical feeler bearings for machining of high-gloss and 3D effect on edges and workpieces;
tool: milling head set diameter 65x20x22 Z4;

Radius scraper:
the slight pulling cut removes any radius milling traces and ensures a perfect finish
the fine adjustment is carried out via SIKO digital counter
airblast device for cleaning of the scanning bearing
extraction system with chip box
knife holder for quick and easy change
manual setting for ON / OFF position

Surface scraper:
cleans the workpease surface from any glue rests on the glue joint

Buffing unit:
2 motors 0.05 kW, 1500 rpm. provide a super finish for ABS and PVC edge material
tool: buffing disc diameter 100 mm;

Workpiece transpor:
workpiece chain feed - secure guide of the workpieces by rubberized chain plates,
guided by hardened steel guides, driven by a 0.75 kW motor;
double roller top pressure
retractable workpiece support rail for large workpieces

5.6 inch color touch screen with integrated PLC control

Фотографії Edge Bander - NEW

  • Promas Edge Bander - NEW PB 90 (1)
  • Promas Edge Bander - NEW PB 90 (2)
  • Promas Edge Bander - NEW PB 90 (3)
  • Promas Edge Bander - NEW PB 90 (4)
  • Promas Edge Bander - NEW PB 90 (5)
  • Promas Edge Bander - NEW PB 90 (6)
  • Promas Edge Bander - NEW PB 90 (7)
  • Promas Edge Bander - NEW PB 90 (8)
  • Promas Edge Bander - NEW PB 90 (9)