IMA Edge Bander with Return Device - second-hand not available

Опис

Edge Bander with Return Conveyor Belt
make IMA
type AVM/k/I

automatic edge banding and finishing machine
right design
for veneers / plastic material as strips and reel material solid wood strips
working width max. 2500 mm
working width min. approx. 75 mm
min. strip length at straight edges:
-at crosscut strips approx. 450 mm
-at reel material approx. 250 mm
max. strip thickness
a) at crosscut strip material approx. 1,3 mm
b) at reel material approx. 3,0 mm
c) max. strip width approx. 10 mm
max. strip height approx. 50 mm
min. strip height a) at crosscut strips approx. 18 mm
b) at reel material approx. 14 mm
work piece thickness min./max. 10 – 45 mm
min. work piece length approx. 150 mm
work piece distance approx. 35 mm
work piece overhang out of the chain track when processing solid wood strips and softforming profiles 35 mm plus
max. strip thickness respectively max. profile depth
Infra red heater for pre-heating of the work piece
glue roll – working with granulate
storage container with pre-heating function
end trim saw
pressure zone – 1 large pressure roll, 6 smaller pressure rolls
end trim saw
flush milling top and bottom
chamfer milling top and bottom
copy milling unit
multi function unit optional equipment (was used for grooving, radius milling, milling of work tips and fronts)
scraper from top and bottom
buffing

with separate return conveyor belt and turning station
feed 7,5 kW

total length 12,30 m, hereof:
machine length 10,30 m, machine width 1,80 m
transport table to return conveyor belt 2 m

return conveyor belt: length 9,50 m, width 90 cm
control cabinet: length 4 m, width 50 cm

total connected load:
55-60 kW
220/380 V
main fuse 125 A