Gabbiani Laminate Flooring Line - second-hand not available

Опис

Laminate Flooring Line
make Gabbiani

Complete line for cutting, formatting and profiling of laminate floor.

The line produced laminate floor:
192 x 1292mm
thickness 6/7/8 mm

Feeder and other conveyor systems make SAG

Consisting of:

- Feeder SAG
for the laminated HDF panels
panel size: 2070 x 2460 mm, max. 2250 x 2750 mm
stacking height max.1250 mm
- Multi Rip Saw Paul
- Cross Splitting Saw Gabbiani
- Formatting of the longitudinal and cross edges (click profile possible) Gabbiani
- Sealing Schiele
- Chamfer Lacquering Giugni
- Packing and Palletizing of the finished panels

Production Volume
productivity (per minute) 66 parquet strips
productivity (at 8 hours shift) 7286 m2
productivity (annual) 7.000.000 m2

Packing
cardboard boxes, open top
instruction manual single sheet guiding device, sheet size 570 x 180 mm
thermo foil wrapping with shrink tunnel

Technical specification
Feeder SAG
- 3,3-3,5 cycles/minute (cycle length 17,2 sec)
- max. panel size 2250 x 2750 mm
- standard panel size 2070 x 2460 mm

deposit on the transport with centering device

Multi Rip Saw
panel splitting longitudinal in thru feed
saw shaft bottom, saw blade diameter 270 mm

Cross Splitting Saw
cross conveying after the Multi Rip Saw
panel splitting in 2 equal pieces
saw shaft bottom
with lateral milling units for formatting of the head sides
at strip infeed 2640 x 203 mm
capacity of approx. 33 strips/min.

1. Double End Tenoner for longitudinal thru feed
working width 190-1000 mm
4 units each side
optional colouring of "click" profile or simply "tongue and groove“ glue profile
brush unit for profile cleaning
possibility of edge chamfering
vacuum heads for applying the sealing liquid (Schiele System)
colour unit for chamfer colouring (Giugni))

2. Double End Tenoner for cross thru feed
max. working width 2000 mm
cam distance in the feeding chain pins 360 mm (it is possible to countersink every 2. cam to double the distance)
4 units each side
optional colouring of "click" profile or simply "tongue and groove“ glue profile

Brush Unit for profile cleaning
possibility of edge chamfering
vacuum heads for applying the sealing liquid (Schiele System)

colour unit for chamfer colouring (Giugni))


For both machines:
- two tooling kits for the click version one
- two tooling kits for the click version two (1 x installation, 1 x spare one)
- one tooling kit for the tongue and groove set
All tooling kits are in very good condition (max. twice sharpened).


Packing
The packing equipment includes:
Single cardboard box feeding
Box forming line (around the strip stack) with melt adhesive dispenser
Label printer (code, logos, barcode). label size 120x80 mm, adhesive from roll
thermo foil application (cross)
thermo foil shrink oven

Packing capacity
Laminate strip thickness per packing
Productivity
6 mm strips 10 pcs. 6,6 field / min.
7 mm strips 9 pcs. 7,5 field / min.
8 mm strips 8 pcs. 8,5 field / min.

Palletizing
pallet capacity is 76 cartons , 1250 mm height
4 cartons per shift 19 shifts
automatic pallet loader (from stack, Euro size)
carton stacker
automatic stripping
extensible foil wrapping

Components manufacturer
gear SEW
pneumatics Festo
SPS Siemens S7 series

The line is still installed, however, there’s no more material for demonstrating!