mütek Briquetting Press - NEW not available

Número de máquina 5196

Fabricante

mütek

modelo

MUP 450

año construcción

2018

Categoría

Otras maquinas

condición

nuevo
mütek Briquetting Press - NEW MUP 450 main picture not available

Descripción

Briquetting Press – NEW
make Mütek
type MUP 450

The capacity of the machine mainly depends on the bulk density as well as the quality of the raw material.
Please note that the residual moisture of the material should be less than 15 % Atro. The granule size should not exceed 25 mm.

hydraulic briquetting press for square briquettes
for 24-hours non-stop-operation
throughput: 300 - 450 kg/h (depends on material)
briquette size: 60 x 150 mm
length adjustable 40-105 mm
feed hopper 920 x 415 mm + with flange frame 30 mm
filling volume approx. 150 l
chip container approx. 920 x 920 x 800 mm
screw conveyor 1,1 kW, FU controlled
hydraulic pre-compressor
hydraulic main compressor
pressure up to 1700 kg/cm²
hydraulic system with oil tank 260 l
pump motor 30 kW / 400 V / 50 cycles
manual cylinder control
control cabinet dust-tight
with Siemens SPS S7-200 control
total connected load approx. 33 kW
machine dimensions 1800 x 1800 x 1900 mm (lxwxh)
weight approx. 3000 kg

including:
- 2 briquette outfeed conveyor approx. 1,5 m long
- low oil switch
- min./max. sensors for automatic operation
- Siemens display TD400C

The feeder should be free of metal and mineral contamination.
Damages to the press tools and/or increased wear could result.

max. allowed moisture: 14 % Atro
max. granulate size: 10 x 2 x 2 mm


Additional prices on demand for:
1 pc. heat register for hydraulic oil
- generation of operating temperature prior to start-up
- prevention of damages / condensation
1 pc. hydraulic oil cooling large cooling register
incl. fan and control
1 pc. hydraulic oil cleaning system
1 pc. pressure increase to 225 bars
1 pc. fast hydraulics
to increase performance, double-acting press cylinder