Soest Cross Sanding Machine for Saw-Rough Effect - NEW Machine

Descripción

Cross Sanding Machine for Sawing Effect
make Soest
type SBC 400 CC

machine from the parquet production for the production of a cross structure resp. a saw-rough optic

working width 400 mm
min. part length approx. 300 mm
thru feed height max. approx. 300 mm

cross sanding unit, 2,2 kW
sanding belt dimensions 2600 x 75 mm
recommended grit 12 or 16

feed infinitely variable, approx. 5 - 25 m/min.
feed motor 0,75 kW

suction connection at the cross-aggregat 1x 100 mm
total connected load approx. 3 kW

The production of a cross structure (sawn effect) on wood surfaces is done with a cross sanding belt with different grains. Depending on the desired effect, the pressure and grain of the sanding belt can be adjusted. The Cross Cutter can be used both on the raw wood surface and on pre-coated surfaces, resulting in a multi-colored surface.

The use of different sanding belt grits enables different effects.