Weber Fine / Cross-Sanding Machine -NEW

Descripción

Fine / Cross-Sanding Machine
make Weber
Type KSN-4-1350 (DCMP2)

with 3 sanding belts and a planetary head station for the high-quality calibration, veneer
and lacquer sanding. With a constant working height 900 mm and in the following

execution:

aggregate 1:
contact roller aggregate with:
a grooved steel contact roller Ø 210 mm for accurate calibration
electrical and program-controlled delivery of the contact roller
pressure bar guide of the workpieces

aggregate 2:
cross belt aggregate with
pressure lamella belt with felt and graphite for a long service life
ISD articulated pressure beam system with 22 mm workpiece recognition and 44 mm pressure piece width
paint package incl. Frequency converter and abrasive belt blow-out

aggregate 3:
CBF combined unit with
grooved rubber contact roller Ø 130 mm, rubber hardness 60 Shore
mechanical adjustment of the contact roller for grain equalization
pneumatic lifting of the contact roller
a transverse slat band with sep. Drive 4.0 kW
ISA articulated pressure beam system with 22 mm workpiece recognition and 22 mm pressure piece width
paint package incl. Frequency converter and abrasive belt blow-out

aggregate 4:
planetary head station
with 6 units each with 2 tools
trimming: Sanding heads with quick-change device
2.0 kW drive - frequency-controlled speed 300 - 1280 rpm on the tool
with electric height adjustment
removable via drawer function (for easier tool change)

operator terminal "SIEMENS" TP900 Comfort
incl. workpiece cleaning

technical specifications:
working width: 1350 mm
drive unit 1 (frequency-controlled): 19.0 kW
drive unit 2 (frequency-controlled): 13.0 kW
drive unit 3 (frequency-controlled): 15.0 kW
drive CBF: 4.0 kW
drive unit 4 (frequency-controlled): 3.9 kW
drive feed: 2.0 kW
drive height adjustment: 1.3 kW
drive Vacuum blower: 4.0 kW
sanding belt speeds: approx. 3 - 18 m / s
a) cross belt aggregate: 15 x 5100 mm
b) widebelt units: 1370 x 2620 mm
c) panetary head station: approx. 300 - 1280 rpm.

workpiece thickness (min./max.): 4 - 200 mm
working height (constant): 900 mm
feed rate: 2-12 m / min

printing requirement: 5.5 bar
connection compressed air: 2 x 1/2 "

operating voltage: 3x 400 Volt / N / PE50 Hz
control voltage: 24 V DC
wiring: according to IEC guidelines