Fisher & Rückle / Monguzzi Longitudinal veneer jointing machine - New

Descripción

Veneer longitudinal joiner with integrated gluing
make Fisher & Rückle
type IMPETUM 900 (2025 model)

Includes 4 mm veneer thickness set
For quick and easy conversion of the IMPETUM for veneer thicknesses up to 4 mm. The kit includes a foot pedal for manually triggering the veneer feed.

For gluing and joint-tight longitudinal joining of parallel veneer strips in a single operation with commercially available urea glues.

Technical data:
Veneer strips must not exhibit extreme tension or waviness.
Veneer strip lengths (in the grain direction) approx. 380 - 3800 mm
Veneer strip widths (across the grain direction) approx. 45 - 900 mm
Veneer strip thicknesses 0.4 - 1.5 mm (up to 4 mm with conversion kit)
Feed speed 5 - 50 m/min.
Throughput speed (practical empirical value) approx. 20 - 30 m/min.
Heating zone length approx. 1000 mm
Max. heating temperature 200 °C
Stand projection 1200 mm
Working height approx. 960 mm

Glue pot capacity: 150 g
Glue type: Urea glue
Glue pot cooling: Water

Features:
- Data storage of machine settings for recurring jobs.
- Separate electric drives for chain drive and glue application. In the event of interruptions, the chains can be protected by stopping, while the glue in the glue pot remains in motion to prevent clumping.
- Glue is applied to each newly fed veneer strip, which significantly improves the quality of the joints.
- Robust and virtually wear-free stainless steel transport chains.
- 6 heating zones for different temperature settings.
- Infinitely variable assembly speeds.
- Touch panel with temperature, speed, and pressure displays.
- Easily accessible glue pot for quick refilling or cleaning.
- Extended glue usage time thanks to integrated glue pot cooling.
- Glue metering for constant and even glue application without excess glue.

Connected load: approx. 3 kW
Compressed air: 6 bar
Compressed air consumption: 5 NL/min.