IMA Autom. Edge Processing Machine - second-hand not available

Descripción

Autom. Edge Processing Machine
make IMA
type Combima

double-sided, left side fix, right side movable

work piece:
min. work piece length approx. 150 mm
min. work piece thickness approx. 10 mm
max. work piece thickness approx. 45 mm

min. thru feed width at longitudinal thru feed without cams approx. 260 mm
min. thru feed width at cross thru feed with cams approx. 320 mm
max. thru feed width approx. 3500 mm

edge material:
min. strip length at max. strip thickness of approx. 0,8 mm approx. 220 mm
min. strip length at max. strip thickness of approx. 1,3 mm approx. 350 mm
min. strip width at cross cut strip material approx. 18 mm
min. strip width at roll material approx. 14 mm

feed infinitely variable, approx. 10 – 50 m/min.

electromotive width adjustment of right machine support with electronic measure pre-selection
fast motion, creep speed and electronical actual value display

transport chains with spring-mounted and disappearing fence cams, distance 1080 mm

continuous top pressure motorized height adjustable by precision guidances

equipped as follows:

2 milling posts 1050 mm high with
a) front sides:
2 scoring saws, jumping 2 x 1,5 kW 100 cycles and
2 ogging saws 2 x 4,4 kW 100 cycles
with brakes and mechanical digital display
b) rear sides:
2 cutters left 90 degrees tilting and controllable
right vertical rigid and controllable, 2 x 3,3 kW 100 cycles, brakes
mechanical digital display horizontal and vertical

closed gluing parts consisting of:
a) drive boxes
b) glue applications
c) 1-fold roll magazine and strip magazine
d) strip control devices
e) 2 additional small pressure rolls each machine side


new end trimming units with lateral tracing, enabling a straight or according adjustment end trimming cut with a chamfer of up to max. approx. 45 Grad degrees by motors each 150 W, 133 Volt, 200 cycles, 12000 rpm as well as HM end trimming saw blades 150 mm diameter with brakes
chamfer units for pre-milling with motors each 400 W
chamfer units for clean chamfering with motors each à 150 W, 133 Volt, 200 cycles, 12000 rpm
2 grooving units controllable 3 kW
oscillating buffing
buffing discs without oscillation

control devices incl. autom. star triangle starting switch for a frequency converter sec. 380 V, 100 cycles, 6000 rpm, protection IP 23
frequency converter 6 kVA with control devices, but without automatic star triangle starting switch, sec. 133 Volt, 200 cycles, 12000 rpm, protection IP 54
frequency converter Himmelwerk model 2 P 180/225-2 D 1.1160/120, IP 23, B 3, drive 380 V, Y, 100 cycles, 220/380 V, 50 cycles
8 suction sockets, diameter 6 x 160 mm, 2 x 250 mm

total length of the edge gluing and finish processing zone 4200 mm
for edge finishing units available length after the gluing part 3300 mm