Ott Edge Bander - second-hand not available

Descripción

Edge Bander
make Ott
type Profimatic M 259

built 2002

with external melting device multi melt system OTT type CMTA

modular gluing system for the processing of EVA glue and PU glue with easy and quick change of the premelting container
edge material PVC, solid wood

banding thickness 0,2 - 20 mm
work piece dimensions: width min. 60 mm, length min. 150 mm, height min. 10 mm, max. 60 mm

quick heating container melt matic for hot melt glue on EVA basis with automatic parallel and counter run control of the glue roller
supply channel for feeding PUR glue by external tank system
external hot melt device multi melt tank with filling level sensor in the combi melt
max. heating temperature funnel/tube 230°C
time control 15 min.
tank content 2 kg
min./max. repump quantity at manual operation 50/500 g
max. repump quantity of the automatic repump 200 g
min./max. glue temperature input 140/160°C
motor 3 kW
pressure zone 1 x pressure roll, 6 x finish pressure rolls
feed 8 - 24 m/min., infinitely variable
line control
heated infeed fence

Spraying device:
-The separating agent is sprayed top and bottom before the premilling unit, so that the glue can no longer adhere to the surface and the work piece cleaning is facilitated.
-Detergent is sprayed top and bottom on the edge section before the buffing unit.
Antistatic coolant is sprayed directly on the glue joint and the edge band after edge banding.

Equipment:
Joint processing unit with 2 motors in parallel and counter run working, automatically controlled

automatic edge magazine for automatic feed of strip edges
automatic reel magazine with end trimming cutter for roll edges
double end trimming unit K-17 front/rear 2 x 0,6 kW, tilting 0-20°
flush milling unit top/bottom 2 x 1,9 kW, 12000/15000 rpm, 200/250 cycles
chamfer milling unit top/bottom with automatic chamfer thickness adjustment 2 x 0,75 kW, 250 cycles, tilting 0-45 °
radius milling unit top/bottom 2 x 0,4 kW, 13800 rpm, spindle inclination 25°
grooving unit 3,5 kW, 8800 rpm, 150 cycles, tilting 90°
corner rounding unit 4 top front/rear, bottom front/rear 4 x 0,35 kW, 10900 rpm, 200 cycles
profile scraping unit, two side tracing, automatically controlled
flat scrapers with fine scanning device for removal of waste glue in the joint area
buffing unit KE-PUR top/bottom 2 x 0,8 kW, 1450 rpm

total connected load 26 kW
machine dimensions 11200 x 960 x 1420 mm (lxwxh)
weight 5500 kg