Renzo Borgonovo Hot Embossing Press / Hot Stamping Machine - NEW vendido

Descripción

Hot Embossing Press / Hot Stamping Machine
make Renzo Borgonovo
type Borgore 500 / ITI

The Borgore 500 ITI hot embossing machine has been designed for hot and cold engraving / stamping on wood. Thanks to the possibility of pressing even large workpieces and to its considerable power, this machine is able to meet all the requirements of hot stamping. Equipped with a solid machine frame and high quality components, it is particularly suitable for parquet flooring, panels, doors, chests, furniture and accessories, picture rails, etc., as well as for all areas that require engraving / embossing.

Technical details

Suitable workpieces / materials:
Any type of wood (solid wood - any type of wood, reclaimed wood, recycled wood) and all common wood materials (plywood, veneer, MDF, 3DF, etc.)

capacity: approx. 1 - 12 m/min.

max. part passage width: 520 mm
max. working width (embossing width): 500 mm
passage height: max. 150 mm

outer roll diameter: 200 - 300 mm
roller bore: 80 mm

embossing/engraving depth: with hot embossing max. 5 mm (depending on wood material)
2 motors, 1.5 KW each (frequency controlled)

roller heating system:
by electric heating lamps, peak power of 20 kW, max. 350°C

Roll cooling system:
Integrated coolant pump, 0.09 kW, for circulation of the cooling liquid.
The cooling system installed in a standard machine does not include the cooling of the cooling liquid, but only its continuous circulation.
External cooling unit optionally available (recommended).

Operation via touch panel

Compressed air requirement: 6 bar, 19 L/min.

Dimensions approx.: 1600 x 1300 x 1600 mm
Weight approx. 1300 kg

** Embossing / smoothing rollers are not included in the scope of delivery **
Roll changing device and external cooling unit available as special accessories.