Homag Block Frame Processing Machine - second-hand not available

Numéro de machine 7089

Fabricant

Homag

Modèle

MFB 2962

Catégorie

Centres d‘usinages à commandes numeriques

Condition

d'occasion
Homag Block Frame Processing Machine - second-hand MFB 2962 main picture not available

Description

Hinge / Lock Plate Processing Machine / Processing of Jambs
make Homag

The machine was built in 2013 - as good as new -

Machine for hinge / lock plate processing on block frames.

Application for doors and door frames

Processing side with visible side on top

Equipment:
1 saw motor, 4,5 kW, 3.000 rpm, tool diameter approx. 500 mm, tiltable by 0 ° and 45 °,

Drill, 1 spindle, 1 x left 1 x right
Motor 0.4 kW, 50 cycles, 3000 rpm.
Motor frequency controlled
Drilling unit vertical to the mitre for connecting and dowelling

1 x left
BASIC MODUL lock machining ZFL
Milling machine ZXR / SBX 2,0 kW LH Rotation
1 milling motor, 2.0 kW, 300 cycles, 18000 rpm.
Motor frequency controlled
work horizontally or vertically from below (door frames only)

1 x left
Milling machine ZXR / SBX 2.0 kW RH rotation
1 milling motor, 2.0 kW, 300 cycles, 18000 rpm.
Motor frequency controlled
work horizontally or vertically from below (door frames only)

1 x left
Milling machine ZXR / SBX 2.0 kW LH Turning
1 milling motor, 2.0 kW, 300 cycles, 18000 rpm.
Motor frequency controlled
work horizontally or vertically from below (door frames only)

1 x left
Milling machine ZXR / SBX 2.0 kW RH rotation
1 milling motor, 2.0 kW, 300 cycles, 18000 rpm.
Motor frequency controlled
work horizontally or vertically from below (door frames only)

1 x left
Milling machine ZXR / SBX 2.0 kW RH rotation
1 milling motor, 2.0 kW, 300 cycles, 18000 rpm.
Motor frequency controlled
work horizontally or vertically from below (door frames only)

Technical data:
- panel length min. 500 mm
- effective length max. approx. 3000 mm
- Panel width min. 220 mm
- Feed speed rigid or frequency controlled according to requirements
- Working height 950 mm +/- 50 mm

SOFTWARE BARCODE control
Preparation of the control for the automatic registration of the barcode from the barcode reader

The technical data are taken from the order confirmation. Errors excepted

Disassembly, assembly and commissioning of the machine on request.

Video

Photos de Block Frame Processing Machine - second-hand

  • Homag Block Frame Processing Machine - second-hand MFB 2962 (1)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (2)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (3)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (4)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (5)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (6)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (7)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (8)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (9)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (10)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (11)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (12)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (13)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (14)
  • Homag Block Frame Processing Machine - second-hand MFB 2962 (15)