A. Costa Double End Tenoner for multi-layer parquet (transverse processing) - second-hand

Description

Double End Tenoner for multi-layer parquet (crosswise processing)
make A. Costa
type Kuadra

suitable for multi-layer parquet (2-layer parquet / 3-layer parquet) with bevel and tongue and groove profile

consisting of:
- loading transport
- double end tenoner A. Costa type Kuadra 252 4+4

double-end tenoner for the transverse processing of parquet with automatic entry transfer, complete with gripper loader and pneumatic alignment
fixed machine side on the left, movable machine side on the right

workpiece dimensions:
lengths between 450 - 4100 mm
widths between 100 - 400 mm
thicknesses between 8 - 30 mm

The opening and closing of the moving side is done with the help of a high-precision screw and precision guides controlled by an electric motor.
Feed unit with a speed of 4-24 m/min.
The feed shaft Ø80 mm is equipped with a polished feather key.
The lower tracks are precision machined and polished steel links connected by intermediate links on maintenance-free roller bearings.
The movement of the chain feed is made by the rotation of the bearings and sliding on self-lubricating guides made of low-friction material.
Upper rails, supplemented by a roller spring system and a 40 mm wide conveyor belt.
Pneumatic system for adjusting the roller pressure on the belt for the main work areas.

Processing stations:
1. 1 + 1 horizontal spindle unit (scoring)
4 kW, 6000 rpm, 380 V, 50 cycles, spindle diameter 40 mm, length 63 mm suction nozzle Ø120 mm

2. 1 + 1 horizontal spindle unit (machining)
4 kW, 6000 rpm, 380 V, 50 cycles, spindle diameter 40 mm, length 63 mm suction nozzle Ø120 mm

3. 1 + 1 vertical spindle unit (profiling, tongue and groove profile)
4kW, 6000 rpm, 380V, 50 cycles
spindle diameter 40 mm, length 63 mm suction socket Ø120 mm
4. 1 + 1 vertical spindle unit (profiling, chamfering)
4 kW, at 6000 rpm/minute, 380 V, 50 Hz
Spindle diameter 40 mm, length 63 mm, suction openings Ø120 mm

All motors can be adjusted vertically, horizontally and at an angle (from -90° to 45°).

Feed adjustable, approx. 4 - 24 m/min.

Extraction and compressed air:
Intake connection Ø 120 mm.
Required air speed 30 m/sec.
Air consumption 20 m3/h.
Working pressure 6 bar.

Electrical installation in a separate cabinet, voltage 380 V - 60 Hz

Safety devices: emergency stop, safety/soundproof cabins

Including diamond tools, if available.