IMA Edge Bander - second hand not available

Description

Edge Bander
make IMA
type Advantage 3600

or rolls and strip material

glue pot / hot melt adhesive container
automatic refill of hot melt adhesive from pre-melter
or granulate feed
with hot melt application device with electronic temperature control
precutting cutting cpipper
pressure zone 6 rolls
trimming saw 2 separate units on common guide shafts
edge sawing off of the front and rear edge of the work piece
flush trimming top and bottom
chamfer / radius milling unit up and down
feed speed 12 m/min.
edge banding material veneer: roll, and strip material; plastic: roller,
and strips; solid wood strips
edge height min. about 14 mm - max. approx. 55 mm
edge thickness min. approx. 0.4 mm - max. approx. 12 mm
solid wood strips max. ca. 12 x 55 mm
work piece width min. about 65 mm
work piece thickness max. 45 - 55mm
working length min. 150 mm

machine dimensions:
L 4.700 mm x W 2.400 mm x H 2.300 mm
weight 2400 kg