Dimter Optimisation Cross Cut Saw - second-hand not available

Numéro de machine 6718

Fabricant

Dimter

Modèle

OptiCut 350

Catégorie

Scies

Condition

d'occasion

This machine is not available anymore.

We hope one of the following machines fits your needs:

Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 main picture not available

Description

Optimisation Cross Cut Saw
make Dimter
type OptiCut 350

built 2004

incl. infeed and angle transfer, outfeed conveyor (12,5 m) with 6 ejecting devices

with integrated length measurement with fluorescence sensor
integrated waste chute

infeed lengths 900 - 6300 mm
infeed widths 36 - 75 mm
infeed thickness 19 - 50 mm

wood cross section:
19 x 36 mm
25 x 55 mm
25 x 75 mm
38 x 50 mm
50 x 75 mm

mix length afer saw min. 180 mm
V-joint length afer saw min. 150 mm

Suitable for hard and soft wood

Input terminal with software OptiCom


operating pressure approx. 8 bar
suction speed min. 30 m/sec.
suction end from approx. 1800 m3/h

connected load approx. 25 kW
operating voltage 400 V / 50 cycles

Upon receipt of your order, the machine will be cleaned again and technically checked!

Photos de Optimisation Cross Cut Saw - second-hand

  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (1)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (2)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (3)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (4)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (5)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (6)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (7)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (8)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (9)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (10)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (11)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (12)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (13)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (14)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (15)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (16)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (17)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (18)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (19)
  • Dimter Optimisation Cross Cut Saw - second-hand OptiCut 350 (20)