Homag Softforming Edge Bander - second-hand not available

Description

Edge Bander Softforming
make Homag
type 79/QE/S2

built 2000

transport chain for work pieces 80 mm wide with rubber cover and magnetic chain brake

top pressure with driven V-belts, motorized height adjustable with digital position display

Technical data:
- feed infinitely variable 10 - 30 m/min.
-working height 920 mm
- working width at thin straight edge:
min. 59 mm at work piece thickness 26 mm (depending on work piece length)
- work piece overhang 35 mm
- work piece thickness 7 - 60 mm
- single measurements for the basic machine can vary according to the processing units

pre-scoring and milling unit for door fillings top
motor 1 kW, 300 cycles, 18000 rpm
parallel working, scanning from top and lateral spindle adjustment for motor and scanning
without tools
adjustment device horizontal pneumatically via turret

milling unit 2 x 3 kW
milling post with spindle adjustments
1 suction hood top
tool diameter max. 150 mm
without tools
for profile milling or premilling

magazine
edge thickness 0,4 - 12 mm
edge width 10 - 65 mm

roll separating device 3,5 mm
edge thickness 3,5 mm
edge width 65 mm
processing: max. 135 mm²
roll Ø: 900 mm

additional assembly HOT MELT GLUE SOFTFORMING/E
glue application onto edge material or work piece
electro-pneumatically controlled cooling nozzle at the end of the pressure zone
blow-off nozzle for work piece cleaning

pressure zone G 4-fold
profile depth max. 20 mm
horizontal and vertical adjustable
rotor for holding pressure roll sets

pre-milling unit top and bottom 0,6 kW
2 motors on top of each other
each0,6 kW, 300 cycles, 18000 rpm
manually lateral movable, height adjustment with top pressure, counter working

milling unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18000 rpm
manually lateral movable, height adjustment with top pressure, spindle adjustment for lateral scanning roll
parallel working
adjustment device horizontal pneumatically

milling unit top and bottom 0,6 kW
2 motors each 0,6 kW, 300 cycles, 18000 rpm
manually lateral movable, height adjustment with top pressure, counter working, spindle adjustment for lateral scanning roll
adjustment device horizontal pneumatically

uni milling unit 1 x 4 kW
milling post with 2 cross supports and spindle adjustments
1 motor 4 kW, 300 cycles, 9000 rpm
max. 90 degrees tilting
counter running
adjustment device horizontal pneumatically
scanning from top with double roll

uni milling unit 1 x 4 kW
milling post with 2 cross supports and spindle adjustments
1 motor 4 kW, 300 cycles, 9000 rpm
max. 90 degrees tilting
counter running
adjustment device horizontal pneumatically
scanning from top with double roll

profile sanding unit PS 20
for sanding of profiles, rebates and straight edges
tilting 10 degrees at installed height 210 mm

buffing unit top and bottom
2 motors each 0,25 kW
inclined and height adjustable
height adjustment with top pressure

HOMATIC control with input unit NC 16