Cross Sanding Machine make Heesemann type KSM 1
with 1 cross belt, 1 longitudinal belt and 1 brush
sanding width 1300 mm
1 supporting stand incl. transport bed with single conveyor belts
drive 3,0 kW motor
feed speed 4,5 – 22 m /min.
table height adjustment to the various work piece thicknesses (3-140 mm)
by electric motor
1 brush roller unit with central height adjustment, diameter 150 mm
drive: 1,5 kW
1 integrated control desk
with operating elements, electric display of disturbing sources
LED display for work piece thru feed and height
1 cross sanding unit
sanding belt dimensions: 4.900 x 150 mm
belt speeds: 12 + 24 m/s
drive: 13/17 kW
with automatic brake device, pressure lamellar belt system, pneum. belt clamping, intermittent belt blasting device, pressure by elastic pressure beam
1 longitudinal sanding unit
sanding belt dimensions: 2.620 x 1.350 mm
belt sanding speeds: 3,5, 10 + 20 m/s
drive: 4,5 / 12 / 17 kW
with automatic brake device, pneumatic belt clamping, intermittent belt blasting device, automatic IR belt control, pressure by elastic pressure beam, front guide roller with larger diameter and eccentric positioning for calibrating works
belt feeding: right
The operation of the pressure beam is effected fully automatical in dependence of the set feed speed by means of an electronic line control
Automatic start of all drive motors by central start button (sanding belt speed is pre-programmed).
operating voltage: 380 Volt, 50 cycles
2 electronic controlled pressure beams
For free multi-track feeding, distance of the control rolls 40 mm,
work piece tolerance balance up to min. 2 mm.
The pressure surfaces of the pressure beams adapt automatically to the shape of the work pieces.
The sanding intensity is controllable relating to the work piece edges, asymmetric as well.
1 work piece clamping device for the safe transport of small or coated work pieces, incl. integrated fan, drive 7,5 kW
1 conveyor belt blasting device below the transport bed, intermittent working, inc.
Cross Sanding Machine - second-hand