Barth 3D Vacuum Membrane Press - NEW not available

Machine number 4375

Manufacturer

Barth

Model

VMP 2513

Category

Presses

Condition

new
Barth 3D Vacuum Membrane Press - NEW VMP 2513 main picture not available

Description

3 D-Vacuum-Membrane Press - NEW
make Barth
type VMP 2513

clamping size 2500 x 1320 mm
vacuum pump 25 m³/h
tank capacity 250 l
membrane: 2 mm caoutchouc up to 80°C

Technical data:
The VMP-series is equipped with a circulating oil lubrication vacuum pump with a suction power of 25 m³/h.
The circulating oil lubrication pump enables the wear-free permanent operation at low operating costs.

At presses with dry running pump a comparatively high wear arises at the pump lamellas.
Therefore they have to be exchanged regularly in order to maintain the max. pressing pressure.
At presses with circulating oil lubrication pump – as the VMP membrane press – a considerably higher end pressure is achieved than at machines working with a dry running pump (up to 98 % vacuum at circulating oil lubrication pump opposite to approx. 80 % at dry running pump).
This means for the user up to 10 tons pressing pressure/m², i.e. approx. 1,5 tons/m² higher pressing pressure as at presses with dry running pump.

The VMP series disposes of an intake air filter protecting the pump from dust.
The pump of the VMP series requires only 0,75 kW keeping down the maintenance costs of the machine.
The pump is running very quietly so that there’s no noise pollution.

Construction
The VMP series is a robust and durable steel construction designed for permanent operation in trade and industry.
Operation and control elements are well protected below the worktop.
The membrane press is movable and thus not bound to a location.