Promas Edge Bander - NEW not available

Опис

Edge Bander - NEW
make PROMAS
type B-PUR-KF

Machine designed for ABS, PVC, melamine and veneer reel material as well as fix lengths of 0,4-3,0 mm thickness and of 6-60 mm edge height.

Gluing by PUR or EVA glue.


Technical data:
work piece thickness: 8 - 60 mm (when using a corner rounding unit max. 40 mm)
work piece width min. approx.: 75 mm
work piece length min. approx.: 120 mm
edge thickness: 0,4 - 3 mm (optional up to 5 mm)
adjustable cutting depth pre-milling unit: 0 - 3,0 mm
max. edge height = work piece thickness + 4 mm (2 mm top and 2 mm bottom)
feed speed: 9/14 m/min.

electrical connection: 400 V, 50 cycles, 3 phases + N
total connected load approx.: 11 kW
air connection: 6 bar
net weight: 1.350 kg


Equipment:
- thru feed transport chain bottom, work piece and double roller top pressure top
- hot air blower, controlled, for pre-heating of the work piece edges before gluing
- automatic edge feeding for roll material over turntable D = 800 mm
- pre-milling unit: 2 reverse, jumping pre-milling units each 1,5 kW (tool height = 30 mm) provide a neat and tear-free pre-milling of the work pieces before gluing of the edge material
- glue application directly onto work pieces, designed for PUR EVA glue Teflon-coated glue container with a capacity of 3 kg, leak-proof (excess glue is automatically re-fed to the glue container),
exact glue application by means of glue roll -
- electronic temperature control with automatic stand-by function (prevents that the glue burns if the machine is not user for a longer time)
- pneumatically operated cut-off knife for reel material up to 3 mm edge thickness
- pressure zone, consisting of a driven pressure roller synchronized with the glue roller and 2 smaller pressure roller with spring tension
- end trimming saw, equipped with 2 high-frequency motors 0,35 kW, 12.000 rpm, 2 saw blades and linear guides
- combination top and bottom milling station, 2 high-frequency motors 0,35 kW with HM-WPL-specials cutters,12000 rpm, suitable for radius and bevel milling
- horizontal and vertical scanning of the work piece, unit adjustment equipped with digital readouts setting to various kinds of edges
- 2 chip extraction hoods with central suction sockets diameter Ø 120 mm, height adjustment of the upper unit by top pressure
- corner copying unit: automatic processing of straight and profiled edges (soft and postforming pieces) up to 3 mm edge thickness, equipped with a high-frequency motor 0,27 kW, selectable via operating panel
- radius scraping unit: for smoothing the radii, fine adjustment by digital counters
- flat scraping unit for removal of any glue remains
- buffing unit with 2 motors for fine polishing of the radii
- incl. tool equipment (after glue application) for radius 3 mm

- colour touch screen with key panel controls the glue temperature settings, automatic temperature reduction when the machine is not used
- switching on and off of units, motorized top pressure adjustment, feed speeds and error diagnosis
- motorized top pressure adjustment, work piece thickness is adjusted via colour touch screen, digital counter for direct reading