Heesemann Multi Purpose Surface sander - NEW not available

номер машини 5309

Виробник

Heesemann

Модель

HSM .3 QLL

Статті

Шліфування-Полірування-Очистка

стан

заново
Heesemann Multi Purpose Surface sander - NEW HSM .3 QLL main picture not available

Опис

Multipurpose Wide Belt Sander
make Heesemann
type HSM .3

cross / longitudinal / longitudinal
sanding width 1.300 mm

post construction with transport bed
continuous transport carpet, incl. transport belt cleaning device
feed speed 3 - 15 m/min. frequency controlled
working height constant 880 mm, upper machine part adjustable by motor in accordance with the work piece thickness (3 - 160 mm), incl. integrated control cabinets

1 pressure roller (diameter 50 mm), oscillating, at machine infeed, incl. work piece oversize control

roller table at machine infeed

1 industrial PC 7''
7 inch TFT colour display 800 x 480 dot resolution
512 MB micro-SD-flash-card
operating system Windows Embedded Compact 7
touch screen design
display for production and downtimes
Ethernet connection optional

with programme memory for 100 programmes

values for motor speeds, sanding start and sanding end, sanding edge intensity and sanding pressure are stored and depending on the programme set automatically adjusted.

1 cross sanding unit
sanding belt size 4800 x 150 mm
belt speed 2,0 - 20 m/s
drive 15 kW frequency converter
infinitely variable adjustment of the sanding belt speeds, in connection with additional rotor for belt-off blowing, wear-free brake device, pressure lamellar system, incl. sanding belt blow-off device, work piece depending control, can be switched-off

1 longitudinal sanding unit
sanding belt size 2620 x 1350 mm
belt speed 1,8 - 18 m/s
drive 15 kW
infinitely variable adjustment of sanding belt speeds, tear-free brake device, automatic balancing of possible different belt edge lengths, incl. sanding belt blow-off device
front calibration deflecting roller diameter 98 mm, smooth, can be switched-on via terminal, incl. sanding belt blow-off device

1 longitudinal sanding unit with pressure lamellar belt system
sanding belt sizes 2620 x 1350 mm
belt speed 1,8 - 18 m/s (without pressure lamellar belt)

1,8 - 9 m/s (with pressure lamellar belt)

drive 15 kW frequency converter

infinitely variable adjustment of the sanding belt speeds, wear-free brake device, automatic balancing of possible different edge belt lengths, sanding belt working in counter direction, incl. eccentrically adjustable drive rollers enabling to adjust the unit for different pressure lamellar belt thicknesses as well as the use of the unit without pressure lamellar belt, incl. sanding belt blow-off device

3 pressure beams with computer controlled selective pressure control system (10 years warranty)
with infinitely variable pressure adaptation of the single pressure elements, for free multitracked feeding, distance of the control rolls 21 mm
work piece tolerance balance up to max. 2 mm by wear-free lifting magnets
working width as well as sanding start and end of the pressure beam is electronically controlled
While one work piece is running thru the machine, the pressure elements enable by means of electric lifting magnets an infinitely variable control of the pressure force of each pressure shoe.
This innovative CSD-technology guarantees at any time a proportional equal pressure regarding the contact surface of the pressure shoe on the work piece. Due to this infinitely dynamical control of the pressure force the risk of “loop through” is almost impossible.
Furthermore, the electro-magnetic CSD-system is maintenance-free, as there is no pollution compared with pneumatic elements.

work piece suction clamping system
for the safe transport of work pieces shorter than 500 mm
in feed direction, with integrated fan, drive 2,2 kW

1 brush roller unit
height adjustable, incl. suction hood
Fibre brush
diameter 120 mm
drive 0,75 kW

operating voltage 400 V, 50 cycles

uninterruptible power supply


machine finish:
- inner paint: white acc. RAL 9010, structure lacquer, silk-matt
- outer pant: white aluminium acc. RAL 9006, structure lacquer, silk-matt
- doors: ultramarine blue RAL 5002, structure lacquer, silk-matt

belt operation side: left
terminal: front side, left