Heesemann Veneer Sheet Sanding Machine - NEW not available

Опис

Veneer Sheet Sanding Machine - NEW
make Heesemann
type FBA 8

roller / roller / roller

sanding width 1.350 mm

Equipped with 3 sanding units for the longitudinal sanding of single veneer sheets and reel material, veneer thickness 0,4 - 5,0 mm.

Free manual feeding at veneer sheets; the min. size of veneer sheets is 300 mm in thru feed direction and 200 mm width.

1 column with integrated control cabinets

Transport bed with continuous smooth transport carpet, incl. transport belt cleaning device, feed speed range 6-30 m/min. frequency controlled, working height constant 880 mm, and the upper machine part is motor-driven height adjustable up to max. 80 mm for cleaning and service works.

Integrated in the transport table are exchangeable strips, each positioned underneath the sanding units, ensuring the very precise, exact and parallel sanding abrasion of the single units.

Work piece oversize control at machine infeed

1 Industrial PC 10,4''
LCD-TFT colour display 800 x 600 resolution, CF card 1 GB, operating system Windows Embedded Standard, touch screen design, with display for production and downtimes. Ethernet OPTONAL.

programme memory for 100 programmes

operating voltage: 400 V, 50 cycles

Machine finishing:
- inner paint white acc. RAL 9010, structure lacquer, semi gloss/silk mat
- outer paint white aluminium acc. RAL 9006, structure lacquer, semi-gloss, silk mat
- doors ultramarine acc. RAL 5001, structure lacquer, semi-gloss/silk mat

belt loading: left (right on request)
terminal: left (right on requested)

Veneer pressure and guidance:
Prior to the first unit the veneer is taken by a springy pressure roll and then guided by a metal sheet into the first sanding unit.
The veneer is safely guided between the following units by means of special down-holding sheets.

Sanding units:

1 longitudinal unit
with contact roller for calibration works (steel)
balance Q 1 (fine balanced) acc. VDI 2060,
driven by Poly-V-belt, maintenance-free
diameter: 250 mm
sanding belt dimensions: 2.620 x 1.400 mm
belt speed: 24 m/s
drive: 22 kW
tear-free brake device, intermittent belt blowing-off device, automatic infra-red belt control, sanding belt counter rotating, motorized NV adjustment for chip take off, incl. sanding belt grain balance

1 longitudinal sanding unit
with contact roller for calibration works (steel)
balance Q 1 (fine balanced) acc. VDI 2060,
driven by Poly-V-belts, maintenance-free
diameter: 250 mm
sanding belt dimensions: 2.620 x 1.400 mm
belt speed: 24 m/s
drive motor: 22 kW
tear-free brake device, intermittent belt blowing-off device, automatic infra-red belt control, sanding belt counter rotating, motorized NV adjustment for chip take off, incl. sanding belt grain balance

1 longitudinal sanding unit
with contact roller for calibration works (rubberized – shore hardness as per demand)
balance Q 1 (fine balanced) acc. 2060
driven by Poly-V-belts, maintenance-free
diameter: 250 mm
sanding belt dimensions: 2.620 x 1.400 mm
belt speed: 24 m/s
drive motor: 22 kW
tear-free brake device, intermittent belt blowing-off device, automatic infra-red belt control, sanding belt counter rotating, motorized NV adjustment for chip take off, incl. sanding belt grain balance

1 rotor blowing-off device with ionization rod, under a common suction hood, at machine outfeed

OPTIONAL:
1. Electronic frequency control 22 kW for lacquer sanding
2. Interruption-free power supply