IMA Single-Sided Edge Banding Machine - second-hand not available

Machine number 4010

Manufacturer

IMA

Model

Adventage 70

Category

Edge Processing Machines

Condition

used

This machine is not available anymore.

We hope one of the following machines fits your needs:

not available

Description

Single-Sided Edge Banding Machine make IMA type Advantage 70

year of manufacture: 2007

trimming unit 08.376
multiple milling unit 08.346
control: ICOS open TS
automation kit Advantage
year 2007

Description
- paper & PVC edges: 0,3 - 3,0 mm
- veneer edges: 0,5 - 3,0 mm
- lippings 3,0 - 12,0 mmfeed speed 16 m/min.
- anti-stick solvent applicator top and bottom
- trimming unit 08.376
with 2 motors each 3,0 kW, 12000 rpm, 200 cycles
- heater for work piece edge pre-heating
- gluing unit 283.1513 with oil bath gear
with hot melt gluing unit 0,8 l
with single coil-/lipping magazine,
coil diam. 800 mm
with main pressure roll and 5 additional rollers
- end-trimming unit 08.415
with 2 motors each 660 W, 400 V, 200 cycles,
12000 rpm
- milling unit 08.055
max. 30 degrees swingable,
with 2 milling motors each 1000 W, 400 V,
200 cycles, 12000 rpm,
- multiple milling unit 08.346
for chamfer and profile milling of the top and
bottom longitudinal edge, as well as contour
trimming of the leading and trailing work piece
corner
2 motors each 660 W, 400 V, 200 cycles, 12000 rpm,
with quick changing device
- cleaning solvent applicator
- profile scraping unit 08.519
with chip box
- self tracing scraping unit 08.50
- buffing unit 08.612
with 2 motors each 0,25 kW, 230/400V, 50 cycles,
1500 rpm
- free space control: ICOS open TSautomation kit Advantage consisting of:
axis for infeed fence, pressure zone and multiple milling unit