IMA Single-Sided Edge Banding Machine - second-hand not available

Descripción

Single-Sided Edge Banding Machine make IMA type Advantage 70

year of manufacture: 2007

trimming unit 08.376
multiple milling unit 08.346
control: ICOS open TS
automation kit Advantage
year 2007

Description
- paper & PVC edges: 0,3 - 3,0 mm
- veneer edges: 0,5 - 3,0 mm
- lippings 3,0 - 12,0 mmfeed speed 16 m/min.
- anti-stick solvent applicator top and bottom
- trimming unit 08.376
with 2 motors each 3,0 kW, 12000 rpm, 200 cycles
- heater for work piece edge pre-heating
- gluing unit 283.1513 with oil bath gear
with hot melt gluing unit 0,8 l
with single coil-/lipping magazine,
coil diam. 800 mm
with main pressure roll and 5 additional rollers
- end-trimming unit 08.415
with 2 motors each 660 W, 400 V, 200 cycles,
12000 rpm
- milling unit 08.055
max. 30 degrees swingable,
with 2 milling motors each 1000 W, 400 V,
200 cycles, 12000 rpm,
- multiple milling unit 08.346
for chamfer and profile milling of the top and
bottom longitudinal edge, as well as contour
trimming of the leading and trailing work piece
corner
2 motors each 660 W, 400 V, 200 cycles, 12000 rpm,
with quick changing device
- cleaning solvent applicator
- profile scraping unit 08.519
with chip box
- self tracing scraping unit 08.50
- buffing unit 08.612
with 2 motors each 0,25 kW, 230/400V, 50 cycles,
1500 rpm
- free space control: ICOS open TSautomation kit Advantage consisting of:
axis for infeed fence, pressure zone and multiple milling unit