Delle Vedove Edge Coating Line for chamfer lacquering - second-hand

Description

Edge Coating Line for chamfer lacquering
make Delle Vedove

for mounting on a formatting machine

consisting of 2 units (1 x right and 1 x left)

built 2011

consisting of:

Basic machine

The basic machine is cooled and thus prevents a drying of the lacquer during the process.
The lacquer tank is integrated and also cooled and isolated. The fill level is electronically collected and re-filled automatically.

- double membrane pump 1/1“ with pressure container
- automatic filter (the dirt is permanently removed and in freely programmable time units automatically pressed in a special container)
- vacuum pump 1 x 1,3 kW, frequency controlled

basic dimensions of the basic machine approx. 300 x 200 x 500 mm


Cooling

The complete housing is designed in sandwich-construction and disposes of 4 cooling circuits.
The supply temperature of the cooling water is approx. 3-5°C so that the dew point is achieved depending on the air humidity. The condensation of the housing prevents the drying of the lacquer in the basic machine.

with Teflon coating against adhesion of the isolating material at the stainless steel water


Edge Coating Unit
The edge coating units is connected with the basic machine via short flexible hoses.
It is cooled and Teflon-coated. The unit disposes of an integrated line injection system, which ensures a homogenous application even at high speeds.

required space approx. 300 mm


Air conditioning
In order to ensure a condensation of the line independently of the existing air humidity, the outside air is sucked in and adjusted to 70-90 % air humidity by an air washer. This air is provided to the lacquer heads, so that the basic machine is dewed at the cooled surfaces.


Cross supports, as available
(For mounting the line on the machine bed and at flexible connections to the head, a small cross support can be used.)