LT Schleiftechnik Calibration Sander top / bottom - second-hand not available

Descripción

Sanding combination top / bottom
make LT Schleiftechnik

Working width 250 mm
Working height approx. 5 - 115 mm

Equipped as follows:
1 x calibration roller (85 Shore) from top 7,5 kW
1 x calibration roller (65 Shore) from top 4.0 kW
1 x brush (Anderlon) from above

1 x calibration roller (85 Shore) from bottom 7,5 kW
1 x calibration roller (65 Shore) from bottom 4,0 kW
1 x brush (Anderlon) from bottom

Abrasive belt dimensions 280 x 1900 mm

With motorized machine-top height adjustment with LED display, 0.5 kW

The machine is mounted on guides and moves slowly sideways to use the full width of the sanding bel, if the machine is working in line with the 4.S. moulder.

The feeding belt with approx. 2.8 m length is mounted on the machine and moves with.

Compressed air connection 6 bar
Suction speed min. 22 m / sec.
Dust extractioin required 5370 m3 / h
Suction connections 7 x 120 mm diameter
Total electrical connection 25 kW

Dimensions approximately 3500 x 1200 x 1800 mm
Weight approx. 4500 kg